Advanced Technology – The Way of Heiwa Engineering. High productivity through advanced technology.

Major Equipment

KOIKE UNITEX

KOIKE UNITEX

This high-precision, multi-functional CNC cutting machine can be used for a wide range of applications—as a special-purpose machine for gas or plasma cutting, or a dual-use machine—and can meet a diverse spectrum of specific needs.

This tough unit is capable of handling ultra-large steel sheets as well as rail spans exceeding 10 m, which are required for simultaneous cutting of two sheets.

Specifications

Body structure Gantry type, dual wheel drive
Drive system Rack and pinion
Rail span 5,000 mm (workpiece: 4,700)
Rail length Overall rail length: 19,200 mm (workpiece: 17,200)
Effective cutting width Rail span - 900 mm
Effective cutting length Rail length – 3,500 mm
Rail weight 37 kg/m (50 kg/m for rail span of 9 m or more)
Max. cutting speed 10,000 mm/min
Max. marking speed 36,000 mm/min
Max. rapid traverse speed Vertical 36,000 mm/min
Horizontal 36,000 mm/min
Torch vertical speed 20,000 mm/min
TCV4025LD

TCV4025LD

(CNC Drilling Machine)

High-performance, single-spindle drilling machine equipped with ATC Capable of machining multiple steps in sequence

Table width 2,500 mm
Length 4,000 mm (8 data points)
Main spindle BBT50
Machining plate thickness t = 3–100 mm
3D FABRI GEAR 400II

3D FABRI GEAR 400 II

Provides continuous, automatic cutting of long pipe and structural steel with 3D laser heads. An excellent processing machine that provides high precision even for complex shapes. 3D laser cutting of round, square, rectangular, and long pipe as well as H, I, and L steel beams. We simply load long pieces of material in the loading station and 3D laser cutting is performed automatically, with the finished parts transferred for unloading.

TruBend 5320

TruBend 5320

It is a highly versatile all-rounder machine with high productivity.

It achieves consistent high productivity in programming, bending mold setup, and all processes related to bending operations.
With its long stroke and long open height, it can accurately handle a variety of bending processed products, including those traditionally considered challenging for bending operations.

pressure 3,200kN
bend length 4,420mm
side plate spacing 3,680mm
press beam and press table distance 735mm
maximum open height 615mm
working height [1] 1,110 - 1,130mm
press table width 200mm
press beam inclination ±10mm

[1] If the lower die height is 100mm, the working height will vary depending on the height of the installed material.

TruBend 7036

TruBend 7036

A high-speed, high-precision machine designed with consideration for ergonomics.

This machine is highly productive and ideal for bending small to medium-sized parts in the best possible working environment with minimal space requirements.

pressure 360kN
bend length 1,020mm
side plate spacing 932mm
press beam and press table distance 420mm
maximum open height 295mm
working height [1] 1,150mm
press table width 120mm
press beam inclination ±1mm

[1] If the lower die height is 100mm, the working height will vary depending on the height of the installed material.

TruLaser 5040 fiber

TruLaser 5040 fiber

A high-end machine with high productivity and output capabilities for AI integration.

The high-output products of the TruLaser 5000 series set new standards for productivity and cost efficiency.

maximum processing size X-axis 4,070mm
Y-axis 2,050mm
Z-axis 115mm
workpiece Maximum weight (for 8kW and above) 3,300kg
maximum speed simultaneous 283m/min
accuracy positioning accuracy 0.05mm
repeatability 0.03mm
laser data maximum output 24,000W
maximum plate thickness mild steel 20[1] / 40[2] / 60[3]mm
stainless steel 40 / 60[3]mm
aluminum 40 / 60[3]mm
copper 5[1] / 16[2]mm
brass 15mm

[1] plasma cutting(N2) [2] oxy-fuel cutting(O2) [3] thick plate cutting package included

TruLaser 3040

TruLaser 3040

(Laser cutting machine for plate and flexible sheet metal)

A CO2 laser cutting machine for plate and flexible sheet metal that employs cutting-edge technologies

Features a wide processing area. Cutting with a laser beam, from thin to thick steel up to 25mm so that customers can create highly precise, complex shapes or simple shapes at high speed.

Processing Capabilities

Cutting Range X axis 4,150mm
Y axis 2,140mm
Z axis 177mm
Max. weight of material for processing - 1,250kg
Max. positioning speed Along axis 60m/min.
2 axes simultaneously 85m/min.
Accuracy Min. programmable unit 0.01mm
Positioning accuracy Pa ±0.10mm
Cycle repeat accuracy Ps ±0.03mm
TruLaser Tube 7000

TruLaser Tube 7000

(Tube cutting machine)

With this flexible high-end machine, a broad range of parts is covered, opening up new areas of application for laser tube cutting. The machine cuts tubes and profiles with a diameter of up to 250mm in mild steel and a wall thickness of up to 8mm with no loss for manufacturing tubes, L-angles and C-channels.

  • Tapping can also be done.
  • Wide-diameter tube cutting
  • High-quality bevel cuts of up to 45°
  • Flexible unloading station with parts sorting function
  • High laser output for fast cutting
  • Small-lot cutting to minimize down time
  • Tiny nozzle diameter for minimal gas consumption

Specifications

Max. loadable tube length 9,000mm
Max. finished part length 6,000mm
Laser oscillator TruFlow 3600
Max. laser output 3,600W
Max. power input 29–55kW/h
Max. sheet thickness
  • Mild steel: 8mm
  • Stainless steel: 6mm
  • Aluminum: 5mm
TruBend 5170

TruBend 5170

(Bending machine)

Specifications

TYPE TruBend 5170 170t
Tonnage max: 1700kN
Stroke max: 445mm
Operating press max: 300bar
Brake time max: 95ms
Springback at 220mm/s max: 10mm
Springback at 160mm/s max: 8mm
MILLAC 1052V II

MILLAC 1052V II

(Large machining center)

Specifications

Spec Unit MILLAC 1052V II
No.50 4,000min-1 No.50 6,000min-1 No.50 12,000min-1 No.40 15,000min-1
Travel X-axis travel (table right/left) mm 2,050 <3,050>
Y-axis travel (table front/back) mm 1,060
Z-axis travel (spindle vertical) mm 800
Table top to spindle nose mm 200–1,0000 <160–960>
Column front to spindle center mm 1,100
Table Working surface mm 2,200 <3,200> x 1,050
Height from floor mm 1,060 <1,150>
Max. load kg 5,000
Spindle Spindle rotational speed min-1 20–4,000 30–6,000 50–12,000 50–15,000
Spindle gear range   2 gears Gearless (built-in motor)
Spindle taper bore   7/24テーパNo.50 7/24 Taper No. 40
Spindle bearing diameter mm Φ100 Φ90 Φ70
Traverse speed Rapid traverse speed m/min X•Y•Z: 16 <X•Y: 12, Z: 16>
Cutting feed rate mm/min X•Y•Z: 10,000
Electric motor Electric motor for spindle kW 22/18.5 (30min./cont.) OSP: 26/18.5 (10min./cont.)
FANUC: 22/18.5 (15min./cont.)
ATC Tool magazine capacity tools 36 [54]
Max. tool diameter (adjacent tools/no adjacent tools) mm Φ120/Φ200 Φ115/Φ115
Max. tool length mm 400 300
Max. tool weight kg 20 8
Machine size Height mm 3,520 <3,570>
Floor space mm 6,760 x 4,470 <9,065 x 4,495>
Weight kg 25,200 <29,600>
CNC   OSP-P300M, FANUC 31i-B

< >: X-axis travel 3,050 specs [ ]: special specifications

VXW-4000-7

VXW-4000-7

(Flat plate automatic bevel cut machine)

It is a groove processing machine capable of cutting wear-resistant steel, capable of handling a maximum plate thickness of 80mm. The upper shaft groove angle ranges from 0° to +84.3°, while the lower shaft groove angle ranges from -60° to +35'. It is compatible with a maximum plate thickness of 80mm. *Subject to change depending on conditions.

Specifications

Length of cut 4,000mm
Cutting angle Upper axis: 0°–84.3° / Lower axis: 0°～ –60.0°
Carriage feed speed 130 ～ 730mm/min.
No. of clamp cylinders 20 (2,000kg/clamp)
Hydraulic monitor equivalent to 2.2kW
Cutter diameter pecial 2-gear cutter (front diameter Φ125mm)
Total power requirement 17.1kW
Machine weight 13,000kg
VXW-2000-5

VXW-2000-5

(Flat plate automatic bevel cut machine)

Offers high-speed, high-precision processing with high-efficiency dual cutter heads that work simultaneously; upper and lower cutters have variable beveling angles and are powered by a new drive system.

Specifications

Length of cut 2,000mm
Cutting angle Upper axis: 0°～ 84.3° / Lower axis: 0°～ –60.0°
Carriage feed speed 100 ～ 750mm/min.
No. of clamp cylinders 10 (2,000kg/clamp)
Hydraulic monitor equivalent to 2.8kW
Cutter diameter pecial 2-gear cutter (front diameter Φ125mm)
Total power requirement 17.1kW
Machine weight 6,500kg
ABP-1015-ATC

ABP-1015-ATC

(Multi-function drilling machine)

A single-plane borer with high-rigidity frame that offers piled plate drilling of wide-diameter holes for heavy cutting.

Processing Capability

Bore diameter Φ6.8–Φ50mm
Plate thickness 6mm–100mm (piled processing okay)
Tap diameter M8–M24 (equivalent to SS400)

ABP Material Size (unit: mm)

Work dimension Size
1 plane 1,000 x 1,500
2 planes 450 x 1,500
1,000 x 700
4 planes 450 x 700

Our Equipment